CR9 realizes the two-in-one spectrophotometer and
spectrocolorreader, easy to use and not expensive. It is a
masterpiece that integrates high precision, high performance, and
high cost performance.
The CR9 (Advanced) is a portable spectrophotometer developed by 3nh
using its own core technology of spectroscopy. It uses a built-in
silicon photodiode array (dual-row 24 groups) sensor, an imported
white board, and the repeatability ΔE*ab can be easily controlled
within 0.03. CR9's powerful performance configuration and excellent
inter-instrument error make color measurement more professional,
while also ensuring the consistency of measurement data of multiple
devices. The CR9 spectrocolorreader takes into account the
measurement speed and the convenience of operation at the same
time. The color can be controlled through the PC-side software, and
it can also be seamlessly connected to the mobile device through
Bluetooth.It greatly expands the application space of the
colorimeter, and makes the traditional colorimeter glow with a
different application charm.
1. Silicon photodiode array (double 32 array) sensor
The dual-32 array sensor with larger area has strong light but not
saturate, higher sensitivity of low light and wider spectral
response range, which ensures the measurement speed, accuracy,
stability and consistency of the instrument.
Mastering the core technology and fully compatible with
international standards.
2. Adopt full-band balanced LED light source
The full-band balanced LED light source ensures sufficient spectral
distribution in the visible light range, avoids the lack of
spectrum of white LEDs in a specific band, and ensures the
measurement speed of the instrument and the accuracy of the
measurement results.
3. Grating Spectrophotometric technology
Using grating spectrophotometric technology, it has higher
resolution and makes color measurement more accurate.
4. Place the base safely to ensure that the whiteboard is not
dirty.
5. Professional whiteboard, a promise that will never change color
forever.
6. Fast charging
Special fast charging method, low-voltage reminder to charge or use
of off-hours to charge, to ensure the capacity and life of the
battery (note: frequent repeated charging of the battery is more
harmful).
7. Novel and fashionable appearance design based on ergonomics
The position of the hand grip and the measurement button are
carefully designed to meet different gripping habits. The smooth
and fine surface is derived from the art of high-precision
appearance processing.
8. Equipped with 4/8mm dual measuring apertures to meet the
measurement needs of different samples
Spectrocolorreader CR9 (Advanced) is equipped with Ø8mm and Ø4mm
platform measuring apertures, which can meet the measurement needs
of most special samples.
9. Camera locating, can clearly observe the measured area
Spectrocolorreader CR9 (Advanced) has a built-in camera for framing
and positioning. Through the real-time framing of the camera, it
can accurately determine whether the measured part of the object is
the center of the target, which improves the measurement efficiency
and accuracy.
10. Massive color card database
The instrument stores 1000 standard and 30,000 samples, and the APP
synchronously stores a large amount of data, which can quickly
check color data, analyze and compare.
Use the App to build your private color database in the cloud. You
don't need to carry a heavy color card. You can use CR9 colorreader
to find the closest color in multiple color cards anytime and
anywhere.
11. Excellent inter- instrument error and repeatability to ensure
the consistency of measurement data of multiple equipment.
12. Multiple color spaces, multiple observation light sources
Provide CIE LAB,XYZ,Yxy,LCh,CIE LUV,s-RGB,βxy,DIN Lab9,DIN Lab99
Munsell(C/2)
color space, and
D65,A,C,D50,D55,D75,F1,F2(CWF),F3,F4,F5,F6,F7(DLF),F8,F9,F10(TPL5),F11(TL84),F12(TL83/U30)
a variety of observation light sources, can meet the special
measurement requirements under different measurement conditions.
13.Adopt the internationally used D/8 SCI/SCE synthesis technology
The D/8 (SCI/SCE) measurement structure is adopted to reflect the
color itself more objectively, and reduce the influence of the
surface texture of the object on the test results. It conforms to
the standardCIE No.15,GB/T 3978,GB 2893,GB/T 18833,ISO7724-1,ASTM
E1164,DIN5033 Teil7.
Specification
| Model | CR9 (Advanced) |
| Optical geometry | D/8 (diffuse illumination, 8° direction reception) |
| SCI/SCE measurement |
| Comply with standard CIE No.15,GB/T 3978,GB 2893,GB/T
18833,ISO7724-1,ASTM E1164,DIN5033 Teil7 |
| Characteristics | Dual measurement aperture, wider adaptability; used for accurate
color measurement and quality control in plastic and electronic,
paint and ink, textile and garment printing and dyeing, printing,
ceramics and other industries |
| Integrating sphere size | Φ40mm |
| Light source | Combined full-spectrum LED light source, UV light source |
| Spectroscopic method | Planar grating |
| Sensor | Silicon photodiode arrays (dual row 32 groups) |
| Wavelength range | 400~700nm |
| Wavelength interval | 10nm |
| Semiband Bandwidth | 10nm |
| Measurement range | L:0~120 |
| Reflectivity: 0~200% |
| Measurement aperture | Dual apertures:Φ8mm,Φ4mm |
| Focusing method | Optical Focus |
| Specular component | SCI&SCE |
| Color space | CIE LAB,XYZ,Yxy,LCh,CIE LUV,s-RGB,βxy,DIN Lab9,DIN Lab99
Munsell(C/2) |
| Color difference formula | ΔE*ab,ΔE*uv,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00, DINΔE99 |
| Other colorimetric indexs | WI(ASTM E313, CIE/ISO,AATCC,Hunter). |
| YI(ASTM D1925, ASTM 313), |
| Metamerism index Mt |
| staining fastness,color fastness,strength, opacity,color card
search |
| Observer angle | 2°/10° |
| Illuminant | D65,A,C,D50,D55,D75,F1,F2(CWF),F3,F4,F5,F6,F7(DLF),F8,F9,F10(TPL5),F11(TL84),F12(TL83/U30) |
| Displayed data | Spectrogram/data, chromaticity value, color difference value/graph,
pass/fail result, color simulation, color offset |
| Display Accuracy | 0.01 |
| Measurement time | Approx. 1.5s (Measure SCI & SCE about 3.2s) |
| Repeatability | Chromaticity value: MAV/SCI, ΔE*ab within 0.03 (When a white
calibration plate is measured 30 times at 5 second intervals after
white calibration) |
| Inter-instrument error | MAV/SCI, within ΔE*ab 0.3 (Average for 12 BCRA Series II color
tiles) |
| Measurement method | Single measurement, average measurement (2~99 times) |
| Locating method | Camera locating,stabilizer locating |
| Size | LxWxH=81X71X214mm |
| Weight | About 460g |
| Battery power | Lithium battery, 6000 times in 8 hours |
| Illuminant life span | 5 years, more than 3 million times measurements |
| Display | TFT true color 3.5inch, capacitive touch screen |
| Data port | USB, Bluetooth® 5.0 |
| Data storage | 1000 standard samples, 30,000 samples (a piece of data can include
SCI/SCE at the same time), APP mass storage |
| Language | Simplified Chinese, English, Traditional Chinese |
| Operating temperature range | 0~40℃, 0~85%RH (no condensation), altitude< 2000m |
| Storage temperature range | -20~50℃, 0~85%RH (no condensation) |
| Standard Accessories | Power adapter, data cable, manual, SQCX quality management software
(official website download), black and white calibration box,
protective cover, wrist strap, dual aperture: Ø8mm + Ø4mm platform
aperture, MOBCCS APP (official website download) |
| Optional Accessories | USB micro printer, powder test box, Bluetooth micro printer,holder
base |
| Notes. | Technical parameters are for reference only, subject to the actual
sales of products
|
3nh Customer Centre
Contact: Jenny Huang (sales manager)
Office Address : F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st
Road, Shiyan, Baoan District, Shenzhen, China.
Factory Address : 4/F, Building 8, Nangang Second Industry Zone,
No. 1026, Songbai Road, Xili, Nanshan Dist., Shenzhen, Guangdong,
WhatsApp/wechat/phone: 86-18165740359
Fax : 86-755-2719-0609
Skype : huang.zhen9
WeChat : 86-18165740359
Email : sales0021@3nh.com
