ISO 2360 3nh YT4200-P5 caoting painting cheap guage detect
non-conductive coatings
Brief Introduction:
YT4500-P1 is a domestic coating thickness gauge manufactured by
3nh. It can quickly and accurately detect non-conductive coatings
on metal substrates. The instrument fully complies with the eddy
current test principle specified by ISO 2360,GB/T 4957. ASTM B1400
and other standards. The instrument is stable, accurate and
powerful, and is widely used in the manufacturing industry, metal
processing industry, chemical industry and other surface
engineering detection fields. It is the basic equipment of coating
surface process industry.
The Fe probe can detect the thickness of non-magnetic coatings
sprayed on magnetic substrates (such as steel), such as the paint
coating, powder spraying coating, porcelain coating, chromium
coating, copper coating, zinc coating, etc.
The NFe-based probe detects the thickness of all insulating
coatings on non-magnetic metal substrates (such as aluminum,
copper, brass, stainless steel, etc.), such as paint coatings,
dusting coatings, and ceramic coatings.
Features:
a. It can quickly and accurately test the thickness of coatings of
various magnetic metal substrates (magnetic method) and
non-magnetic metal substrates (eddy current method).
b. One-handed design, in line with the structural design of human
mechanics.
c. It can quickly and automatically identify the iron matrix and
the non-iron matrix, one-key test.
d. The instrument can be accurately calibrated by single point
calibration and multi-point calibration.
e. Low power consumption, more power saving, low power will alarm.
f. With backlit display, buzzer prompts.
g. High wear-resistant probe, no less than 800,000 measurements.
h. Multiple measurement modes: single point measurement, continuous
measurement.
Parameters:
| Product Name | Split dual-use coating thickness gauge |
| Standard | ASTM b499, ASTM d1400; ISO 2178, ISO 2360, ISO 2808; GB / T 4956 / 4957 JB / T 8393 |
| Matrix | Fe/NFe |
| Probe type | Integrated |
| Resolution | 0.1/1 μ m |
| Measurement range | 0 ~ 1 250 μ m |
| Measurement accuracy | zero calibration: ± (3% H + 1) μm Two point calibration: ± (1 ~ 3% H + 1.5) μ m; note: H is the sample thickness |
| Minimum measurement size | 10X10mm |
| Minimum measurement thickness | Magnetic: 0.2mm; non-magnetic: 0.05mm |
| Minimum curvature | convex radius 5mm; concave radius 10mm |
| Unit | μ m |
| Power | 2X1.5V AA batteries (AA alkaline or Ni-MH rechargeable batteries) |
| Size | 102x66x24mm |
| Weight | 99g (including battery) |
| Working temperature | 0 ~ 40 ° C (10-90% RH without condensation) |
| Storage temperature | - 10 ~ 50 ° C |
| Standard accessories | 2 bases (iron base, aluminum base) wrist strap. Calibration test
piece |
| Optional accessories | calibration test piece (12μm, 25μm) |
| |
Contact Information:
Contact Person: Clara Liu;
Email: L001@3nh.com;
Wechat & Whatsapp ID: +8613510310267;
Skype: clara.3nh
