Color reader spectrophotometer 3nh TS7700 High Precision
Colorimeter To replace Konica Minolta CM700D
Introduction:
Ts7x series is a grating spectrophotometer that 3nh company has spent 3 years to design and is developed by 3nh independent intellectual property rights. The instrument adopts
1000 line precision blazed grating as the spectroscopic element,
the silicon photocell array with large photosensitive area as the
detector, the full spectrum led with high life as the light source,
and the optical resolution is less than 10nm in the visible light
range.
Under the condition of d/8 geometric optical illumination recommended by CIE, TS7700 grating spectrophotometer can accurately measure the SCI and SCE reflectance data of samples
/ fluorescent samples, and also can accurately measure and express various color difference
formulas and color indexes in various color spaces. With
spectrophotometer TS7700, it can easily realize the accurate transmission of color and
can also be used as the detection equipment of accurate color
matching system.
Spectrophotometer TS7700 is also widely used in the color quality control of various
products. TS7700 is equipped with high-end color management software, which is connected
to the computer to realize more function expansion. The instrument
has stable performance, accurate color measurement and powerful
function. It is widely used in plastic electronics, paint and
coating, textile printing and dyeing, printing paper, automobile,
medical treatment, cosmetics and food industries, as well as
scientific research institutions and laboratories etc.
Features:
1. D / 8 geometric optical structure, conforming to CIE No.15, GB /
T 3978, GB 2893, GB / T 18833, iso7724 / 1, ASTM e1164, din5033
teil7;
2. Adopt combined LED light source with high life and low power
consumption, including UV / excluding UV;
3. Switch 8mm & 4mm aperture( the flat/ tip measuring aperture can
be switched easily, which is suitable for more tested sample)
4. Dual optical path system, the optical resolution in the visible
range is less than 10nm, which can measure the SCI and SCE spectrum
of the sample at the same time;
5. Accurate spectrum and lab data, used for color matching and
accurate color transmission;
6. High hardware configuration: 3.5-inch TFT true color screen,
capacitive touch screen, 1000 line blazed grating, silicon
photocell array detector with large photosensitive area, etc;
7. USB / Bluetooth dual communication mode, wider adaptability;
8. Super dirt resistant and stable standard white calibration
board;
9. Large capacity storage space, which can store more than 30000
pieces of test data
10.2/10 standard observer's angle, multiple light source modes,
multiple surface color systems, meet various standards of
chromaticity indicators, and the needs of various customers for
color measurement;
11. Camera locating position and Stabilizer cross measurement
position;
12. PC software has powerful function expansion;
Specification:
| Model | TS7700 |
| Optical Geometry | Reflect: di:8°, de:8°(diffused illumination, 8-degree viewing
angle) |
| SCI (specular component included)/SCE (specular component excluded)
; Include UV / excluded UV light source |
| Conforms to CIE No.15,GB/T 3978,GB 2893,GB/T 18833,ISO7724-1,ASTM
E1164,DIN5033 Teil7 |
| Characteristic | double apertures for accurate color analysis and transmission in
laboratory |
| It is used for precise color measurement and quality control in
plastic electronics, paint and ink, textile and garment printing
and dyeing, printing, ceramics and other industries, and for
fluorescent sample measurement. |
| Integrating Sphere Size | Φ40mm |
| Light Source | Combined full spectrum LED light source, UV light source |
| Spectrophotometric Mode | Flat Grating |
| Senso | Silicon photodiode array (double row 40 groups) |
| Wavelength Range | 400~700nm |
| Wavelength Interval | 10nm |
| Semiband Width | 10nm |
| Measured Reflectance Range | 0-200% |
| Measuring Aperture | MAV:Φ8mm/Φ10mm;SAV:Φ4mm/Φ5mm |
| Specular Component | SCI&SCE |
| Color Space | CIE LAB,XYZ,Yxy,LCh,CIE LUV,s-RGB,HunterLab,βxy,DIN Lab99
Munsell(C/2) |
| Color Difference Formula | ΔE*ab,ΔE*uv,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00, DINΔE99,ΔE(Hunter) |
| Other Colorimetric Index | WI(ASTM E313,CIE/ISO,AATCC,Hunter), |
| YI(ASTM D1925,ASTM 313), |
| Metamerism Index MI, |
| Staining Fastness, Color Fastness, Color Strength, Opacity, |
| 8° Glossiness,555 tone classification |
| Observer Angle | 2°/10° |
| Illuminant | D65,A,C,D50,D55,D75,F1,F2(CWF),F3,F4,F5,F6,F7(DLF),F8,F9,F10(TPL5),F11(TL84),F12(TL83/U30) |
| Displayed Data | Spectrogram/Values, Samples Chromaticity Values, Color Difference
Values/Graph, PASS/FAIL Result, Color Offset |
| Measuring Time | About 1.5s (Measure SCI & SCE about 3.2s) |
| Repeatability | Spectral reflectance: MAV/SCI, Standard deviation within 0.08% (400
nm to 700 nm: within 0.18%) |
| Chromaticity value: MAV/SCI, within ΔE*ab 0.02 ( When a white
calibration plate is measured 30 times at 5 second intervals after
white calibration) |
| Inter-instrument Error | MAV/SCI, Within ΔE*ab 0.15
(Average for 12 BCRA Series II color tiles) |
| Measurement Mode | Single Measurement, Average Measurement(2-99times) |
| Locating Method | Camera Locating,stabilizer cross position |
| Dimension | L*W*H=129X76X217mm |
| Weight | Approx 600g |
| Battery | Li-ion battery, 6000 measurements within 8 hours |
| Illuminant Life Span | 5 years, more than 3 million times measurements |
| Displayed Data | 3.5-inch TFT color LCD, Capacitive Touch Screen |
| Data Port | USB, Bluetooth 4.2 |
| Data Storage | Standard 1000 Pcs, Sample 30000 Pcs |
| Language | Simplified Chinese, English, traditional Chinese |
| Operating Environment | 0~40℃, 0~85%RH (no condensing), Altitude < 2000m |
| Storage Environment | -20~50℃, 0~85%RH (no condensing) |
| Standard Accessory | Power Adapter, User Guide, PC Software(Download from office
website), USB cable, White and Black Calibration Cavity, Protective
Cover, Wrist strap, 8mm flat aperture, 8mm tip aperture, 4mm flat
aperture, 4mm tip aperture |
| Optional Accessory | Micro Printer, Powder Test Box |
| Notes | The specifications are subject to change without notice. |
Packaging & Shipping
Shipping Detail:
| Package: | Alumnium alloy metal box or carton package. |
| Payment: | T/T, Western Union, Paypal , Credit Card |
| Lead Time: | 1-3 workdays |
| Shipping | DHL, Fedex, UPS, EMS,TNT, etc |
Packing List:
| No. | Name | Qty | Type |
| 1 | Colorimeter | 1 | Standard Accessory |
| 2 | White Calibration Plate | 1 | Standard Accessory |
| 3 | Aperture | 1 | Standard Accessory |
| 4 | USB cable | 1 | Standard Accessory |
| 5 | Power Adapter | 1 | Standard Accessory |
| 6 | Li-ion battery | 1 | Standard Accessory |
| 7 | User Manual | 1 | Standard Accessory |
| 8 | Product certification and warranty card | 1 | Standard Accessory |
| 9 | PC software(download from the office website) | 1 | Standard Accessory |
| 10 | Universal test components | 1 | Optional Accessory |
| 11 | Powder test box | 1 | Optional Accessory |
| 12 | Mini Printer | 1 | Optional Accessory |
Company Information
Shenzhen ThreeNH Technology Co., Ltd / Shenzhen Tilo Technology Co., Ltd . was found in 1998, and we are specializes in the R&D, production and sales of colorimeter, spectrophotometer, color density meter, gloss meter,
color light box, color proof table, coating thickness gauge, iso
test chart, etc., which is the leading producer in the color and glossy surface measurement field in China. We are also the national high technology enterprise.Till now we have received more than 20 patents and passed CE, ISO 9001, ROHS, FCC, TUV etc certifications.
Our Services
1.24 hours online to ensure quick response to customers' inquiry or
online message;
2. Help customers to choose the best suitable machine model;
3. We support OEM and ODM service and 12 months warranty from the
purchase date.
